$Testing requirements for refractory materials /$

Testing requirements for refractory materials /

Saved in:

Bibliographic Details
Main Author:	Calle, Luz Marina (Author)
Format:	Government Document Electronic eBook
Language:	English
Published:	Kennedy Space Center, FL : National Aeronautics and Space Administration, Kennedy Space Center, 2011.
Series:	NASA technical memorandum ; 2010-216293 R.
Subjects:	Refractory materials. Thermodynamic properties. Launching. Chemical properties.
Online Access:	CONNECT

Similar Items

Probabilistic modeling of high-temperature material properties of a 5-harness 0/90 Sylramic fiber/CVI-SiC/MI-SiC woven composite /
by: Nagpal, V.
Published: (1998)

Thermal and dielectric properties of a homogeneous moon based on microwave and infrared temperature observations /
by: Calvert, Ted A.
Published: (1969)

Mechanical and thermal properties of two Cu-Cr-Nb alloys and NARloy-Z /
by: Ellis, David L. (Engineer), et al.
Published: (1996)

Testing of electroformed deposited iridium/powder metallurgy rhenium rockets /
by: Reed, Brian D., et al.
Published: (1996)

Surface characterization techniques : an overview /
by: Miyoshi, Kazuhisa
Published: (2002)

Molecular dynamics simulations of silicon carbide, boron nitride and silicon for ceramic matrix composite applications /
by: Aluko, Olanrewaju
Published: (2019)

Ames Research Center shear tests of SLA-561V heat shield material for Mars-Pathfinder /
by: Tran, Huy
Published: (1996)

Corrosion on Mars : effect of the Mars environment on spacecraft materials /
by: Calle, Luz M.
Published: (2019)

Ideal gas thermodynamic properties for the phenyl, phenoxy, and o-Biphenyl radicals /
by: Burcat, A., et al.
Published: (1985)

Structural framework for flight II: NASA's role in development of advanced composite materials for aircraft and space structures : final report /
by: Tenney, Darrel R.
Published: (2019)

Testing of face-milled spiral bevel gears at high-speed and load /
by: Handschuh, Robert F.
Published: (2001)

Thermal characterization of a NASA 30-cm ion thruster operated up to 5 kW /
by: Sarver-Verhey, Timothy R., et al.
Published: (2001)

Parallel grand canonical Monte Carlo (ParaGrandMC) simulation code /
by: Yamakov, Vesselin I.
Published: (2016)

Thermal contact conductance /
by: Salerno, Louis J., et al.
Published: (1997)

Full-scale aircraft cabin flammability tests of improved fire-resistant materials /
by: Stuckey, Robert N., et al.
Published: (1974)

Characterization of the NASA Glenn Research Center 8-by 6-foot supersonic wind tunnel supersonic test section (2020 Test) /
by: Johnson, Aaron M., et al.
Published: (2020)

Experimental and analytical characterization of fluted-core sandwich composite structures /
by: Schultz, Marc R.
Published: (2021)

A thermostructural analysis of a diboride composite leading edge /
by: Kowalski, Tom
Published: (1996)

Generalized fluid system simulation program, version 6.0 /
by: Majumdar, A. K.
Published: (2016)

RL10A-3-3A rocket engine modeling project /
by: Binder, Michael, et al.
Published: (1997)

A general reversible hereditary constitutive model.
by: Saleeb, A. F., et al.
Published: (1997)

Materials Research in Microgravity 2012 /
Published: (2012)

Assessment of microphone phased array for measuring launch vehicle lift-off acoustics /
by: Garcia, Roberto
Published: (2012)

Spaceflight safety on the north coast of America /
by: Ciancone, Michael L., et al.
Published: (1996)

Rate dependent stress-strain behavior of advanced polymer matrix composites /
by: Gates, Thomas S., 1959-
Published: (1991)

Launch vehicle performance with solid particle feed systems for atomic propellants /
by: Palaszewski, Bryan Alan Richard
Published: (1998)

Electromagnetic nondestructive evaluation of wire insulation and models of insulation material properties /
by: Bowler, Nicola
Published: (2012)

Development and short-range testing of a 100 kW side-illuminated millimeter-wave thermal rocket /
by: Bruccoleri, Alexander
Published: (2015)

Testing and analysis of sensor ports /
by: Zhang, M.
Published: (2016)

Computation of kinetics for the hydrogen/oxygen system using the thermodynamic method /
by: Marek, C. John
Published: (1996)

Affordable In-space transportation /
by: Curtis, L. A.
Published: (1996)

Fairing separation analysis using SepTOOL /
by: Zalewski, Bartlomiej Francisze, et al.
Published: (2015)

A rocket engine for Mars sample return using in situ propellants /
by: Linne, Diane L.
Published: (1997)

Space Shuttle Program (SSP) shock test and specification experience for reusable flight hardware equipment /
by: Larsen, Curtis E.
Published: (2012)

Mechanical properties of degraded PMR-15 resin /
by: Tsuji, Luis C. 1974-, et al.
Published: (1998)

ADDJUST : a view of the first 25 years /
by: Nieberding, Joe, et al.
Published: (2015)

An evaluation of two flat-black silicone paints for space application /
by: Clatterbuck, Carroll H., et al.
Published: (1990)

Equilibrium normal-shock and stagnation-point properties of helium for incident-shock Mach numbers from 1 to 30 /
by: Olstad, Walter B., et al.
Published: (1968)

Probabilistic modeling of ceramic matrix composite strength /
by: Shah, A. R.
Published: (1998)

Cryogenic orbital testbed (CRYOTE) ground test article, final report /
by: Johnson, Wesley L.
Published: (2015)